Best Practices to Follow for Fiber Optic Cable Installation

Businesses today require a fast internet connection and a strong computer network. Although it is possible to create a good connection using copper cables, nothing can replace fiber optic cables. Basically, copper wires transmit information through electrical current. Although copper cables can work well, they also have some disadvantages. For example, they may not work properly when radio signals are around. Therefore, it is a great idea to replace them with fiber optic cables. In this article, we’re going to take a look at some of the best practices that can help you install fiber optic cables. Read on to find out.

Determine the length of the cable.

First, you may want to decide how long a cable you need for your entire setup. We suggest that you order additional length to ensure you don’t end up delaying the project due to a shortage of sufficient cable.

In some scenarios, you will need these cables in multiple directions. As a result, you will need a lot of cables. For example, in some buildings, you may not have all connection points in the same direction. Therefore, you may need to run these cables in different directions.

Create a port map

For DIY installation, we suggest that you have a detailed port map. In fact, if you are going to hire the services of a professional, you may still need a port map. Actually, this type of map will serve as your setup guide and inventory sheet.

There are many parts to a port map. This includes additional hardware, patch panels, network cabinet placement, and connections. What happens is that a port map can serve as a reference and improve efficiency. Other than this, it can help you troubleshoot network issues on a regular basis.

Adhere to tensile load rating

It is essential to note that each fiber optic cable is designed to withstand specific tensile and tensile loads. Therefore, you must meet these qualifications. As said above, make sure the cable is not a tightrope.

If it’s too tight, you’ll be at a higher risk of breaking. Apart from this, you may want to use cable pullers to separate the cables in your building. If you’re not careful, you can end up damaging the wires.

Use a short cable if possible

Although fiber optic cables can be a good option for long-range connections, we suggest that you keep the distance as short as possible. First of all, a short distance cable will allow faster information transmission. In addition, it will reduce the length, which is essential to reduce the risk of cable breakage.

And you may not want to forget about using the lube to prevent pulling and snagging. Therefore, you may want to follow these instructions if you want to ensure that the cable is installed correctly.

In short, we suggest you follow these guidelines if you want to install fiber optic cables in your building without making common mistakes.

Leave a Reply

Your email address will not be published. Required fields are marked *